Lijsten 188 Creality Ender 5 Plus Temperature

Lijsten 188 Creality Ender 5 Plus Temperature. As such, i've edited the firmware and increased the heater_0_maxtemp to 315 °c. I believe the problem is the hot bed termistor, because the bed to be hot, but the temperature don´t raise any value, only the inicial temperature (32 º celsius). It will preheat to that temperature but then when i select a file to print it will change the temperature to something else like 200 and 60.

Uitgelicht Creality Ender 5 Plus Review Print Big 3d Print Beginner

It will preheat to that temperature but then when i select a file to print it will change the temperature to something else like 200 and 60. I've made a few successful prints but have started having an issue with the bed and nozzle temperature changing. As such, i've edited the firmware and increased the heater_0_maxtemp to 315 °c.

I believe the problem is the hot bed termistor, because the bed to be hot, but the temperature don´t raise any value, only the inicial temperature (32 º celsius).

I believe the problem is the hot bed termistor, because the bed to be hot, but the temperature don´t raise any value, only the inicial temperature (32 º celsius). Any help in getting the manual adjustment fixed would be. It will preheat to that temperature but then when i select a file to print it will change the temperature to something else like 200 and 60. I've made a few successful prints but have started having an issue with the bed and nozzle temperature changing. Is there something i'm missing.

It will preheat to that temperature but then when i select a file to print it will change the temperature to something else like 200 and 60. .. Example i can have pla temperatures set at 230 and 70.

It will preheat to that temperature but then when i select a file to print it will change the temperature to something else like 200 and 60. Any help in getting the manual adjustment fixed would be. As such, i've edited the firmware and increased the heater_0_maxtemp to 315 °c. It will preheat to that temperature but then when i select a file to print it will change the temperature to something else like 200 and 60. Is there something i'm missing. I believe the problem is the hot bed termistor, because the bed to be hot, but the temperature don´t raise any value, only the inicial temperature (32 º celsius). I've made a few successful prints but have started having an issue with the bed and nozzle temperature changing. Example i can have pla temperatures set at 230 and 70. In my slicer, i can slice and print at 300 °c, however, i cannot manually adjust the temperature on the lcd screen past the stock setting of 260 °c. It will preheat to that temperature but then when i select a file to print it will change the temperature to something else like 200 and 60.

I've made a few successful prints but have started having an issue with the bed and nozzle temperature changing.. I've made a few successful prints but have started having an issue with the bed and nozzle temperature changing. Is there something i'm missing. I believe the problem is the hot bed termistor, because the bed to be hot, but the temperature don´t raise any value, only the inicial temperature (32 º celsius). Any help in getting the manual adjustment fixed would be. In my slicer, i can slice and print at 300 °c, however, i cannot manually adjust the temperature on the lcd screen past the stock setting of 260 °c. It will preheat to that temperature but then when i select a file to print it will change the temperature to something else like 200 and 60. As such, i've edited the firmware and increased the heater_0_maxtemp to 315 °c. Example i can have pla temperatures set at 230 and 70. Is there something i'm missing.

As such, i've edited the firmware and increased the heater_0_maxtemp to 315 °c. Any help in getting the manual adjustment fixed would be. It will preheat to that temperature but then when i select a file to print it will change the temperature to something else like 200 and 60. I've made a few successful prints but have started having an issue with the bed and nozzle temperature changing.

I believe the problem is the hot bed termistor, because the bed to be hot, but the temperature don´t raise any value, only the inicial temperature (32 º celsius).. I believe the problem is the hot bed termistor, because the bed to be hot, but the temperature don´t raise any value, only the inicial temperature (32 º celsius). Is there something i'm missing. Any help in getting the manual adjustment fixed would be. I've made a few successful prints but have started having an issue with the bed and nozzle temperature changing. Is there something i'm missing.

Is there something i'm missing. In my slicer, i can slice and print at 300 °c, however, i cannot manually adjust the temperature on the lcd screen past the stock setting of 260 °c. I've made a few successful prints but have started having an issue with the bed and nozzle temperature changing. I believe the problem is the hot bed termistor, because the bed to be hot, but the temperature don´t raise any value, only the inicial temperature (32 º celsius). Any help in getting the manual adjustment fixed would be. It will preheat to that temperature but then when i select a file to print it will change the temperature to something else like 200 and 60. As such, i've edited the firmware and increased the heater_0_maxtemp to 315 °c. Is there something i'm missing. Example i can have pla temperatures set at 230 and 70. Example i can have pla temperatures set at 230 and 70.

In my slicer, i can slice and print at 300 °c, however, i cannot manually adjust the temperature on the lcd screen past the stock setting of 260 °c. . I believe the problem is the hot bed termistor, because the bed to be hot, but the temperature don´t raise any value, only the inicial temperature (32 º celsius).

Example i can have pla temperatures set at 230 and 70. Example i can have pla temperatures set at 230 and 70. It will preheat to that temperature but then when i select a file to print it will change the temperature to something else like 200 and 60... As such, i've edited the firmware and increased the heater_0_maxtemp to 315 °c.

I've made a few successful prints but have started having an issue with the bed and nozzle temperature changing. I believe the problem is the hot bed termistor, because the bed to be hot, but the temperature don´t raise any value, only the inicial temperature (32 º celsius). Example i can have pla temperatures set at 230 and 70. Any help in getting the manual adjustment fixed would be. In my slicer, i can slice and print at 300 °c, however, i cannot manually adjust the temperature on the lcd screen past the stock setting of 260 °c... It will preheat to that temperature but then when i select a file to print it will change the temperature to something else like 200 and 60.

As such, i've edited the firmware and increased the heater_0_maxtemp to 315 °c. I believe the problem is the hot bed termistor, because the bed to be hot, but the temperature don´t raise any value, only the inicial temperature (32 º celsius). Example i can have pla temperatures set at 230 and 70.

It will preheat to that temperature but then when i select a file to print it will change the temperature to something else like 200 and 60... It will preheat to that temperature but then when i select a file to print it will change the temperature to something else like 200 and 60. As such, i've edited the firmware and increased the heater_0_maxtemp to 315 °c. I've made a few successful prints but have started having an issue with the bed and nozzle temperature changing. Any help in getting the manual adjustment fixed would be. In my slicer, i can slice and print at 300 °c, however, i cannot manually adjust the temperature on the lcd screen past the stock setting of 260 °c. Is there something i'm missing. Example i can have pla temperatures set at 230 and 70. I believe the problem is the hot bed termistor, because the bed to be hot, but the temperature don´t raise any value, only the inicial temperature (32 º celsius).. Example i can have pla temperatures set at 230 and 70.

As such, i've edited the firmware and increased the heater_0_maxtemp to 315 °c... In my slicer, i can slice and print at 300 °c, however, i cannot manually adjust the temperature on the lcd screen past the stock setting of 260 °c. Is there something i'm missing.

In my slicer, i can slice and print at 300 °c, however, i cannot manually adjust the temperature on the lcd screen past the stock setting of 260 °c. It will preheat to that temperature but then when i select a file to print it will change the temperature to something else like 200 and 60.

It will preheat to that temperature but then when i select a file to print it will change the temperature to something else like 200 and 60. In my slicer, i can slice and print at 300 °c, however, i cannot manually adjust the temperature on the lcd screen past the stock setting of 260 °c. Is there something i'm missing. I believe the problem is the hot bed termistor, because the bed to be hot, but the temperature don´t raise any value, only the inicial temperature (32 º celsius). Example i can have pla temperatures set at 230 and 70... I've made a few successful prints but have started having an issue with the bed and nozzle temperature changing.

Example i can have pla temperatures set at 230 and 70. I've made a few successful prints but have started having an issue with the bed and nozzle temperature changing. It will preheat to that temperature but then when i select a file to print it will change the temperature to something else like 200 and 60. I believe the problem is the hot bed termistor, because the bed to be hot, but the temperature don´t raise any value, only the inicial temperature (32 º celsius). As such, i've edited the firmware and increased the heater_0_maxtemp to 315 °c. Any help in getting the manual adjustment fixed would be... Is there something i'm missing.

In my slicer, i can slice and print at 300 °c, however, i cannot manually adjust the temperature on the lcd screen past the stock setting of 260 °c.. As such, i've edited the firmware and increased the heater_0_maxtemp to 315 °c. Is there something i'm missing. I believe the problem is the hot bed termistor, because the bed to be hot, but the temperature don´t raise any value, only the inicial temperature (32 º celsius). It will preheat to that temperature but then when i select a file to print it will change the temperature to something else like 200 and 60... I believe the problem is the hot bed termistor, because the bed to be hot, but the temperature don´t raise any value, only the inicial temperature (32 º celsius).

Is there something i'm missing.. I believe the problem is the hot bed termistor, because the bed to be hot, but the temperature don´t raise any value, only the inicial temperature (32 º celsius). Is there something i'm missing. Example i can have pla temperatures set at 230 and 70. It will preheat to that temperature but then when i select a file to print it will change the temperature to something else like 200 and 60. I've made a few successful prints but have started having an issue with the bed and nozzle temperature changing. Any help in getting the manual adjustment fixed would be. In my slicer, i can slice and print at 300 °c, however, i cannot manually adjust the temperature on the lcd screen past the stock setting of 260 °c. As such, i've edited the firmware and increased the heater_0_maxtemp to 315 °c.. It will preheat to that temperature but then when i select a file to print it will change the temperature to something else like 200 and 60.

Any help in getting the manual adjustment fixed would be.. Example i can have pla temperatures set at 230 and 70. In my slicer, i can slice and print at 300 °c, however, i cannot manually adjust the temperature on the lcd screen past the stock setting of 260 °c. In my slicer, i can slice and print at 300 °c, however, i cannot manually adjust the temperature on the lcd screen past the stock setting of 260 °c.

In my slicer, i can slice and print at 300 °c, however, i cannot manually adjust the temperature on the lcd screen past the stock setting of 260 °c.. . As such, i've edited the firmware and increased the heater_0_maxtemp to 315 °c.

It will preheat to that temperature but then when i select a file to print it will change the temperature to something else like 200 and 60.. I believe the problem is the hot bed termistor, because the bed to be hot, but the temperature don´t raise any value, only the inicial temperature (32 º celsius). As such, i've edited the firmware and increased the heater_0_maxtemp to 315 °c. I've made a few successful prints but have started having an issue with the bed and nozzle temperature changing. It will preheat to that temperature but then when i select a file to print it will change the temperature to something else like 200 and 60. I believe the problem is the hot bed termistor, because the bed to be hot, but the temperature don´t raise any value, only the inicial temperature (32 º celsius).

Example i can have pla temperatures set at 230 and 70.. . I believe the problem is the hot bed termistor, because the bed to be hot, but the temperature don´t raise any value, only the inicial temperature (32 º celsius).

As such, i've edited the firmware and increased the heater_0_maxtemp to 315 °c.. Is there something i'm missing. I believe the problem is the hot bed termistor, because the bed to be hot, but the temperature don´t raise any value, only the inicial temperature (32 º celsius). Example i can have pla temperatures set at 230 and 70. I've made a few successful prints but have started having an issue with the bed and nozzle temperature changing. It will preheat to that temperature but then when i select a file to print it will change the temperature to something else like 200 and 60. As such, i've edited the firmware and increased the heater_0_maxtemp to 315 °c. I believe the problem is the hot bed termistor, because the bed to be hot, but the temperature don´t raise any value, only the inicial temperature (32 º celsius).

As such, i've edited the firmware and increased the heater_0_maxtemp to 315 °c. Is there something i'm missing. As such, i've edited the firmware and increased the heater_0_maxtemp to 315 °c.

I've made a few successful prints but have started having an issue with the bed and nozzle temperature changing. Example i can have pla temperatures set at 230 and 70. In my slicer, i can slice and print at 300 °c, however, i cannot manually adjust the temperature on the lcd screen past the stock setting of 260 °c. I've made a few successful prints but have started having an issue with the bed and nozzle temperature changing. Any help in getting the manual adjustment fixed would be. Is there something i'm missing.

As such, i've edited the firmware and increased the heater_0_maxtemp to 315 °c. Is there something i'm missing. Any help in getting the manual adjustment fixed would be. Example i can have pla temperatures set at 230 and 70. It will preheat to that temperature but then when i select a file to print it will change the temperature to something else like 200 and 60.. I believe the problem is the hot bed termistor, because the bed to be hot, but the temperature don´t raise any value, only the inicial temperature (32 º celsius).

Any help in getting the manual adjustment fixed would be... Any help in getting the manual adjustment fixed would be. As such, i've edited the firmware and increased the heater_0_maxtemp to 315 °c. It will preheat to that temperature but then when i select a file to print it will change the temperature to something else like 200 and 60. I believe the problem is the hot bed termistor, because the bed to be hot, but the temperature don´t raise any value, only the inicial temperature (32 º celsius). I've made a few successful prints but have started having an issue with the bed and nozzle temperature changing. Example i can have pla temperatures set at 230 and 70... I've made a few successful prints but have started having an issue with the bed and nozzle temperature changing.

As such, i've edited the firmware and increased the heater_0_maxtemp to 315 °c.. Is there something i'm missing. I believe the problem is the hot bed termistor, because the bed to be hot, but the temperature don´t raise any value, only the inicial temperature (32 º celsius)... Example i can have pla temperatures set at 230 and 70.

As such, i've edited the firmware and increased the heater_0_maxtemp to 315 °c. I believe the problem is the hot bed termistor, because the bed to be hot, but the temperature don´t raise any value, only the inicial temperature (32 º celsius). Example i can have pla temperatures set at 230 and 70. In my slicer, i can slice and print at 300 °c, however, i cannot manually adjust the temperature on the lcd screen past the stock setting of 260 °c. As such, i've edited the firmware and increased the heater_0_maxtemp to 315 °c. It will preheat to that temperature but then when i select a file to print it will change the temperature to something else like 200 and 60. Is there something i'm missing. I've made a few successful prints but have started having an issue with the bed and nozzle temperature changing.. In my slicer, i can slice and print at 300 °c, however, i cannot manually adjust the temperature on the lcd screen past the stock setting of 260 °c.

It will preheat to that temperature but then when i select a file to print it will change the temperature to something else like 200 and 60. As such, i've edited the firmware and increased the heater_0_maxtemp to 315 °c. Any help in getting the manual adjustment fixed would be. It will preheat to that temperature but then when i select a file to print it will change the temperature to something else like 200 and 60. Is there something i'm missing... Is there something i'm missing.

Example i can have pla temperatures set at 230 and 70. Any help in getting the manual adjustment fixed would be. As such, i've edited the firmware and increased the heater_0_maxtemp to 315 °c. Is there something i'm missing. I've made a few successful prints but have started having an issue with the bed and nozzle temperature changing. It will preheat to that temperature but then when i select a file to print it will change the temperature to something else like 200 and 60. In my slicer, i can slice and print at 300 °c, however, i cannot manually adjust the temperature on the lcd screen past the stock setting of 260 °c.

Is there something i'm missing. I believe the problem is the hot bed termistor, because the bed to be hot, but the temperature don´t raise any value, only the inicial temperature (32 º celsius).. Any help in getting the manual adjustment fixed would be.

Is there something i'm missing... Is there something i'm missing. I believe the problem is the hot bed termistor, because the bed to be hot, but the temperature don´t raise any value, only the inicial temperature (32 º celsius). Any help in getting the manual adjustment fixed would be. Example i can have pla temperatures set at 230 and 70. Any help in getting the manual adjustment fixed would be.

I've made a few successful prints but have started having an issue with the bed and nozzle temperature changing... In my slicer, i can slice and print at 300 °c, however, i cannot manually adjust the temperature on the lcd screen past the stock setting of 260 °c. I believe the problem is the hot bed termistor, because the bed to be hot, but the temperature don´t raise any value, only the inicial temperature (32 º celsius). Any help in getting the manual adjustment fixed would be. I've made a few successful prints but have started having an issue with the bed and nozzle temperature changing. Is there something i'm missing. It will preheat to that temperature but then when i select a file to print it will change the temperature to something else like 200 and 60. As such, i've edited the firmware and increased the heater_0_maxtemp to 315 °c. Example i can have pla temperatures set at 230 and 70... As such, i've edited the firmware and increased the heater_0_maxtemp to 315 °c.

I believe the problem is the hot bed termistor, because the bed to be hot, but the temperature don´t raise any value, only the inicial temperature (32 º celsius)... Any help in getting the manual adjustment fixed would be. I've made a few successful prints but have started having an issue with the bed and nozzle temperature changing. It will preheat to that temperature but then when i select a file to print it will change the temperature to something else like 200 and 60... Example i can have pla temperatures set at 230 and 70.

Is there something i'm missing.. .. I've made a few successful prints but have started having an issue with the bed and nozzle temperature changing.

In my slicer, i can slice and print at 300 °c, however, i cannot manually adjust the temperature on the lcd screen past the stock setting of 260 °c... Example i can have pla temperatures set at 230 and 70. I believe the problem is the hot bed termistor, because the bed to be hot, but the temperature don´t raise any value, only the inicial temperature (32 º celsius). In my slicer, i can slice and print at 300 °c, however, i cannot manually adjust the temperature on the lcd screen past the stock setting of 260 °c. It will preheat to that temperature but then when i select a file to print it will change the temperature to something else like 200 and 60. As such, i've edited the firmware and increased the heater_0_maxtemp to 315 °c. I've made a few successful prints but have started having an issue with the bed and nozzle temperature changing.

Example i can have pla temperatures set at 230 and 70. It will preheat to that temperature but then when i select a file to print it will change the temperature to something else like 200 and 60. Is there something i'm missing. I've made a few successful prints but have started having an issue with the bed and nozzle temperature changing. I believe the problem is the hot bed termistor, because the bed to be hot, but the temperature don´t raise any value, only the inicial temperature (32 º celsius).. I believe the problem is the hot bed termistor, because the bed to be hot, but the temperature don´t raise any value, only the inicial temperature (32 º celsius).

Any help in getting the manual adjustment fixed would be. I believe the problem is the hot bed termistor, because the bed to be hot, but the temperature don´t raise any value, only the inicial temperature (32 º celsius).

It will preheat to that temperature but then when i select a file to print it will change the temperature to something else like 200 and 60... I believe the problem is the hot bed termistor, because the bed to be hot, but the temperature don´t raise any value, only the inicial temperature (32 º celsius). It will preheat to that temperature but then when i select a file to print it will change the temperature to something else like 200 and 60. As such, i've edited the firmware and increased the heater_0_maxtemp to 315 °c. Example i can have pla temperatures set at 230 and 70. Any help in getting the manual adjustment fixed would be. I've made a few successful prints but have started having an issue with the bed and nozzle temperature changing. Is there something i'm missing.. Example i can have pla temperatures set at 230 and 70.

Any help in getting the manual adjustment fixed would be... Any help in getting the manual adjustment fixed would be. I believe the problem is the hot bed termistor, because the bed to be hot, but the temperature don´t raise any value, only the inicial temperature (32 º celsius). As such, i've edited the firmware and increased the heater_0_maxtemp to 315 °c. I've made a few successful prints but have started having an issue with the bed and nozzle temperature changing. Is there something i'm missing. It will preheat to that temperature but then when i select a file to print it will change the temperature to something else like 200 and 60. Example i can have pla temperatures set at 230 and 70... Is there something i'm missing.

Is there something i'm missing.. . Any help in getting the manual adjustment fixed would be.

Example i can have pla temperatures set at 230 and 70. I've made a few successful prints but have started having an issue with the bed and nozzle temperature changing. I believe the problem is the hot bed termistor, because the bed to be hot, but the temperature don´t raise any value, only the inicial temperature (32 º celsius). It will preheat to that temperature but then when i select a file to print it will change the temperature to something else like 200 and 60. Example i can have pla temperatures set at 230 and 70. As such, i've edited the firmware and increased the heater_0_maxtemp to 315 °c.. It will preheat to that temperature but then when i select a file to print it will change the temperature to something else like 200 and 60.

I've made a few successful prints but have started having an issue with the bed and nozzle temperature changing... Example i can have pla temperatures set at 230 and 70.. I've made a few successful prints but have started having an issue with the bed and nozzle temperature changing.

Is there something i'm missing. Any help in getting the manual adjustment fixed would be. Is there something i'm missing. I believe the problem is the hot bed termistor, because the bed to be hot, but the temperature don´t raise any value, only the inicial temperature (32 º celsius).

It will preheat to that temperature but then when i select a file to print it will change the temperature to something else like 200 and 60.. It will preheat to that temperature but then when i select a file to print it will change the temperature to something else like 200 and 60. Example i can have pla temperatures set at 230 and 70. I've made a few successful prints but have started having an issue with the bed and nozzle temperature changing. I believe the problem is the hot bed termistor, because the bed to be hot, but the temperature don´t raise any value, only the inicial temperature (32 º celsius). Any help in getting the manual adjustment fixed would be... As such, i've edited the firmware and increased the heater_0_maxtemp to 315 °c.

It will preheat to that temperature but then when i select a file to print it will change the temperature to something else like 200 and 60... I believe the problem is the hot bed termistor, because the bed to be hot, but the temperature don´t raise any value, only the inicial temperature (32 º celsius).. Example i can have pla temperatures set at 230 and 70.

Is there something i'm missing. As such, i've edited the firmware and increased the heater_0_maxtemp to 315 °c. I believe the problem is the hot bed termistor, because the bed to be hot, but the temperature don´t raise any value, only the inicial temperature (32 º celsius). It will preheat to that temperature but then when i select a file to print it will change the temperature to something else like 200 and 60. I've made a few successful prints but have started having an issue with the bed and nozzle temperature changing. Is there something i'm missing... Any help in getting the manual adjustment fixed would be.

As such, i've edited the firmware and increased the heater_0_maxtemp to 315 °c. Any help in getting the manual adjustment fixed would be.

It will preheat to that temperature but then when i select a file to print it will change the temperature to something else like 200 and 60.. Is there something i'm missing. I believe the problem is the hot bed termistor, because the bed to be hot, but the temperature don´t raise any value, only the inicial temperature (32 º celsius)... Any help in getting the manual adjustment fixed would be.

Is there something i'm missing. .. As such, i've edited the firmware and increased the heater_0_maxtemp to 315 °c.

Any help in getting the manual adjustment fixed would be. Example i can have pla temperatures set at 230 and 70... Is there something i'm missing.

In my slicer, i can slice and print at 300 °c, however, i cannot manually adjust the temperature on the lcd screen past the stock setting of 260 °c.. In my slicer, i can slice and print at 300 °c, however, i cannot manually adjust the temperature on the lcd screen past the stock setting of 260 °c. Any help in getting the manual adjustment fixed would be. Example i can have pla temperatures set at 230 and 70. I've made a few successful prints but have started having an issue with the bed and nozzle temperature changing. As such, i've edited the firmware and increased the heater_0_maxtemp to 315 °c. Is there something i'm missing. I believe the problem is the hot bed termistor, because the bed to be hot, but the temperature don´t raise any value, only the inicial temperature (32 º celsius). It will preheat to that temperature but then when i select a file to print it will change the temperature to something else like 200 and 60.. As such, i've edited the firmware and increased the heater_0_maxtemp to 315 °c.

Example i can have pla temperatures set at 230 and 70. As such, i've edited the firmware and increased the heater_0_maxtemp to 315 °c. Is there something i'm missing. In my slicer, i can slice and print at 300 °c, however, i cannot manually adjust the temperature on the lcd screen past the stock setting of 260 °c. I believe the problem is the hot bed termistor, because the bed to be hot, but the temperature don´t raise any value, only the inicial temperature (32 º celsius). Any help in getting the manual adjustment fixed would be. I believe the problem is the hot bed termistor, because the bed to be hot, but the temperature don´t raise any value, only the inicial temperature (32 º celsius).

I believe the problem is the hot bed termistor, because the bed to be hot, but the temperature don´t raise any value, only the inicial temperature (32 º celsius). Is there something i'm missing. Example i can have pla temperatures set at 230 and 70. In my slicer, i can slice and print at 300 °c, however, i cannot manually adjust the temperature on the lcd screen past the stock setting of 260 °c. I've made a few successful prints but have started having an issue with the bed and nozzle temperature changing. Any help in getting the manual adjustment fixed would be. As such, i've edited the firmware and increased the heater_0_maxtemp to 315 °c. It will preheat to that temperature but then when i select a file to print it will change the temperature to something else like 200 and 60. I believe the problem is the hot bed termistor, because the bed to be hot, but the temperature don´t raise any value, only the inicial temperature (32 º celsius). I've made a few successful prints but have started having an issue with the bed and nozzle temperature changing.

Is there something i'm missing. In my slicer, i can slice and print at 300 °c, however, i cannot manually adjust the temperature on the lcd screen past the stock setting of 260 °c. As such, i've edited the firmware and increased the heater_0_maxtemp to 315 °c.

As such, i've edited the firmware and increased the heater_0_maxtemp to 315 °c. I believe the problem is the hot bed termistor, because the bed to be hot, but the temperature don´t raise any value, only the inicial temperature (32 º celsius). Is there something i'm missing. It will preheat to that temperature but then when i select a file to print it will change the temperature to something else like 200 and 60... It will preheat to that temperature but then when i select a file to print it will change the temperature to something else like 200 and 60.

It will preheat to that temperature but then when i select a file to print it will change the temperature to something else like 200 and 60.. I believe the problem is the hot bed termistor, because the bed to be hot, but the temperature don´t raise any value, only the inicial temperature (32 º celsius). I've made a few successful prints but have started having an issue with the bed and nozzle temperature changing. As such, i've edited the firmware and increased the heater_0_maxtemp to 315 °c. Is there something i'm missing. Example i can have pla temperatures set at 230 and 70. In my slicer, i can slice and print at 300 °c, however, i cannot manually adjust the temperature on the lcd screen past the stock setting of 260 °c. In my slicer, i can slice and print at 300 °c, however, i cannot manually adjust the temperature on the lcd screen past the stock setting of 260 °c.

As such, i've edited the firmware and increased the heater_0_maxtemp to 315 °c. Example i can have pla temperatures set at 230 and 70. Any help in getting the manual adjustment fixed would be. I believe the problem is the hot bed termistor, because the bed to be hot, but the temperature don´t raise any value, only the inicial temperature (32 º celsius). In my slicer, i can slice and print at 300 °c, however, i cannot manually adjust the temperature on the lcd screen past the stock setting of 260 °c. As such, i've edited the firmware and increased the heater_0_maxtemp to 315 °c.. Is there something i'm missing.

In my slicer, i can slice and print at 300 °c, however, i cannot manually adjust the temperature on the lcd screen past the stock setting of 260 °c.. . Example i can have pla temperatures set at 230 and 70.

Example i can have pla temperatures set at 230 and 70. I've made a few successful prints but have started having an issue with the bed and nozzle temperature changing. In my slicer, i can slice and print at 300 °c, however, i cannot manually adjust the temperature on the lcd screen past the stock setting of 260 °c. Example i can have pla temperatures set at 230 and 70.. In my slicer, i can slice and print at 300 °c, however, i cannot manually adjust the temperature on the lcd screen past the stock setting of 260 °c.

Example i can have pla temperatures set at 230 and 70. I've made a few successful prints but have started having an issue with the bed and nozzle temperature changing. As such, i've edited the firmware and increased the heater_0_maxtemp to 315 °c. It will preheat to that temperature but then when i select a file to print it will change the temperature to something else like 200 and 60. Is there something i'm missing. I believe the problem is the hot bed termistor, because the bed to be hot, but the temperature don´t raise any value, only the inicial temperature (32 º celsius). In my slicer, i can slice and print at 300 °c, however, i cannot manually adjust the temperature on the lcd screen past the stock setting of 260 °c. I believe the problem is the hot bed termistor, because the bed to be hot, but the temperature don´t raise any value, only the inicial temperature (32 º celsius).

It will preheat to that temperature but then when i select a file to print it will change the temperature to something else like 200 and 60. I've made a few successful prints but have started having an issue with the bed and nozzle temperature changing. In my slicer, i can slice and print at 300 °c, however, i cannot manually adjust the temperature on the lcd screen past the stock setting of 260 °c. It will preheat to that temperature but then when i select a file to print it will change the temperature to something else like 200 and 60. As such, i've edited the firmware and increased the heater_0_maxtemp to 315 °c. I believe the problem is the hot bed termistor, because the bed to be hot, but the temperature don´t raise any value, only the inicial temperature (32 º celsius). Example i can have pla temperatures set at 230 and 70. Any help in getting the manual adjustment fixed would be. Is there something i'm missing. Example i can have pla temperatures set at 230 and 70.

Example i can have pla temperatures set at 230 and 70... I believe the problem is the hot bed termistor, because the bed to be hot, but the temperature don´t raise any value, only the inicial temperature (32 º celsius). It will preheat to that temperature but then when i select a file to print it will change the temperature to something else like 200 and 60. In my slicer, i can slice and print at 300 °c, however, i cannot manually adjust the temperature on the lcd screen past the stock setting of 260 °c. Example i can have pla temperatures set at 230 and 70. As such, i've edited the firmware and increased the heater_0_maxtemp to 315 °c. Is there something i'm missing.. I've made a few successful prints but have started having an issue with the bed and nozzle temperature changing.

As such, i've edited the firmware and increased the heater_0_maxtemp to 315 °c. As such, i've edited the firmware and increased the heater_0_maxtemp to 315 °c. Is there something i'm missing. Any help in getting the manual adjustment fixed would be. Example i can have pla temperatures set at 230 and 70. In my slicer, i can slice and print at 300 °c, however, i cannot manually adjust the temperature on the lcd screen past the stock setting of 260 °c.. It will preheat to that temperature but then when i select a file to print it will change the temperature to something else like 200 and 60.

I've made a few successful prints but have started having an issue with the bed and nozzle temperature changing.. I've made a few successful prints but have started having an issue with the bed and nozzle temperature changing.. Is there something i'm missing.

Any help in getting the manual adjustment fixed would be. I believe the problem is the hot bed termistor, because the bed to be hot, but the temperature don´t raise any value, only the inicial temperature (32 º celsius). Example i can have pla temperatures set at 230 and 70. It will preheat to that temperature but then when i select a file to print it will change the temperature to something else like 200 and 60. Is there something i'm missing. In my slicer, i can slice and print at 300 °c, however, i cannot manually adjust the temperature on the lcd screen past the stock setting of 260 °c. Any help in getting the manual adjustment fixed would be. As such, i've edited the firmware and increased the heater_0_maxtemp to 315 °c.. I believe the problem is the hot bed termistor, because the bed to be hot, but the temperature don´t raise any value, only the inicial temperature (32 º celsius).

Any help in getting the manual adjustment fixed would be.. . I've made a few successful prints but have started having an issue with the bed and nozzle temperature changing.

As such, i've edited the firmware and increased the heater_0_maxtemp to 315 °c. Any help in getting the manual adjustment fixed would be. I've made a few successful prints but have started having an issue with the bed and nozzle temperature changing. I believe the problem is the hot bed termistor, because the bed to be hot, but the temperature don´t raise any value, only the inicial temperature (32 º celsius). It will preheat to that temperature but then when i select a file to print it will change the temperature to something else like 200 and 60. As such, i've edited the firmware and increased the heater_0_maxtemp to 315 °c. Is there something i'm missing. In my slicer, i can slice and print at 300 °c, however, i cannot manually adjust the temperature on the lcd screen past the stock setting of 260 °c. Example i can have pla temperatures set at 230 and 70. Example i can have pla temperatures set at 230 and 70.

Example i can have pla temperatures set at 230 and 70. I've made a few successful prints but have started having an issue with the bed and nozzle temperature changing. As such, i've edited the firmware and increased the heater_0_maxtemp to 315 °c. Any help in getting the manual adjustment fixed would be. Is there something i'm missing. Example i can have pla temperatures set at 230 and 70. I believe the problem is the hot bed termistor, because the bed to be hot, but the temperature don´t raise any value, only the inicial temperature (32 º celsius).